Skip to Content

How to Clean a Baby Brezza Bottle Warmer

How to Clean a Baby Brezza Bottle Warmer

The Baby Brezza Bottle Warmer is a product that quickly warms breast milk, formula, or even baby food. It can warm milk or food from room temperature, refrigerated, or even frozen temperatures. Within minutes, you can have a bottle ready for the baby. But how do you keep the device clean in between use?

Keeping your Baby Brezza Bottle Warmer clean is not a very time-consuming nor backbreaking chore. There are, however, daily cleaning upkeep tips that will help you keep the appliance in proper working order. So, let’s discuss some of these things more in-depth.

Cleaning the Baby Brezza Bottle Warmer After Each Use

After each use, allow the Baby Brezza Bottle Warmer to cool down and dump any remaining water into the sink. You want to store this product dry, so wipe down the inside compartment after giving it a quick rinse under running water. It is difficult to get your hand down there to the bottom of the chamber, so that is why it is suggested to give it a rinse.

The Baby Brezza Bottle Warmer comes with an inner compartment for holding the bottle in place. This orange holder can be washed by hand in warm, soapy water. As for the outside of the appliance, it can be wiped down regularly with a damp cloth, just to remove any dirt or grime that may accumulate as it sits on your counter. Do not use scratchy sponges and pads or any harsh chemicals to clean the outside.

Monthly Baby Brezza Bottle Warmer Cleaning

To give the inside of the Baby Brezza Bottle Warmer a thorough cleaning, it is recommended to descale any mineral build-up every four weeks or so. It is important to make sure the appliance is fully cooled off before cleaning. To begin, unplug the product, remove the orange holder, and empty any excess water.

Add a Descaling Solution

Set the appliance back on the counter and pour in the descaling solution. It is recommended that you use 2 ounces of white vinegar and 4 ounces of water. (Even though water and white vinegar will work just fine, Baby Brezza sells a liquid product designed specifically for cleaning their appliances. You can find this product on the Baby Brezza website or on Amazon.)

Pour that solution into the Baby Brezza Bottle Warmer water chamber. Let that cycle through one heating cycle on setting number 5. Just press the room temperature button repeatedly until you see setting 5. There is a chart of settings on the back of your appliance. And setting number 5 lasts around 5 minutes.

Note: Make sure there is plenty of ventilation when running the setting with vinegar. And to prevent injury, always allow the product to cool down after each use.

Rinse the Device

After the Baby Brezza Bottle Warmer has again cooled, you may rinse it to remove any remaining hints of vinegar. Then, go ahead and wipe the chamber dry. Again, it can be difficult to reach the bottom of the inside. You can use a paper towel and the end of a spoon to reach the very ends or allow the product to air dry with the top open.

Removing Mold

If you see mold growing on your Baby Brezza Bottle Warmer, the suggested way to remove it is to let a descaling solution sit overnight. Perhaps you left town for a few days and didn’t empty or dry out the chamber. Pour in either the Baby Brezza descaler solution or 1/3 cup of water and 1/3 cup of white vinegar. Then rinse and dry, as usual, the next day.

Conclusion

To clean the Baby Brezza Bottle Warmer, allow the product to cool. Pour any remaining water out of the chamber and pour in the descaling solution of water and vinegar. Allow that solution to run through one heat cycle on setting number 5. After that, pour out the remaining liquid, rinse it, and wipe it dry. Never use harsh or rough tools or cleaning products on your Baby Brezza Bottle Warmer. And be sure to let it cool down and be wiped down after every use.