Even though most of the time chlorine is added in to water to purify it, it is not good for consumption. Chlorine and fluoride are not good for both drinking, skin and hair. They make the skin dry and pale with early signs of ageing. When it comes to clothes, they make them fade out fast
Luckily, there are filters that can filter that out to make sure that you have clean water in your house that is free from chlorine and Fluoride.
4 best whole house water filter to remove fluoride and chlorine
To get the best whole house water filter to remove fluoride and chlorine, it is mandatory that you do due diligence which involves research and comparison. Many companies are making water filters but they are not all made the same.
In this guide, we are going to compare 4 of the best whole house water filters so that it is easier for you to choose the best. Our top picks include:
This is a reverse osmosis system that is a high capacity and can remove up to 99% of contaminants including lead, chlorine, fluoride, toxins and hard metals. It is very efficient for the whole house as it can do up to a capacity of 300 gallons per day. The O membranes have been made in such a way that they can reject a wide spectrum of impurities up to 0.0001 micron.
It contains a booster pump that is built-in to raise the water pressure so that to increase the production of purified water. The filer system is compatible with the ispring storage tank of both 11 or 20 gallons. Though the ispring tank is not included.
To make sure that the system is safe, the system is covered with a stainless-steel frame as well as a metal hanging bracket. That acts as a buffer while making installation or any filter changes easier.
The product comes with an extended manufacturer warranty.
- Weight: 52 pounds
- Product dimensions: 14 x 10 x 30 inches
- Voltage: 110 Volts
- Maximum pressure: 85 PSI
- Has a big filtration capacity
- Contains a booster pump to increase the water pressure
- It has a stainless-steel frame that acts as a buffer
- Has a pressure gauge
- It is not the easiest to install and requires a professional
This is a water filter system that has been specifically meant for filtering out chlorine and fluoride. That does not mean that it does not filter out other contaminants as well. It also filters out lead, chemicals and heavy metals. Even though it filters out a lot of toxins and metals, it leaves behind the beneficial minerals such as calcium and magnesium. It is very convenient to use as it is just installed at your tap. It is also economical as it saves you money that you would have spent buying water.
It has a filter capacity of up to 300 gallons
- Weight: 10.15 pounds
- Product dimensions: 16.4 x 14.3 x 6.8 inches
- It is easy to install
- It has a filter capacity of up to 300 gallons which is decent
- It is convenient
- Saves you money
- The first 5 gallons will not be so clean and will taste metallic
- Users complained that it does not come with enough instructions
This is an under the sink water filter system for removing fluoride, chlorine, lead and other heavy metals.
It is meant for use with water that has been treated prior such as municipally treated water or water that has been disinfected.
Most of the time, municipal water has fluoride added in it without the people’s consent. This will make sure that it removes fluoride and other contaminants while making sure that the essential minerals are untouched.
The system is easy to install and there is no plumbing that is required. All you need is a connect hose that is connected with the current cold-water valve and faucet system.
The filter has a capacity of handling up to 8000 gallons and can last up to 2 years.
- Weight: 5.75 pounds
- Product dimension: 5 x 10 x 15 inches
- Temperature range: 10-100 degrees Fahrenheit
- Flow rate: 1.32 GPM
- Easy to install
- It has a great flow rate of up to 1.32 GPM
- It does not filter out trace minerals
- Some users complained of the filter not being able to remove much fluoride
- Some users had an issue with the product leaking
This is a reverse osmosis water system that has been made with a great design to make sure that you get safe drinking water. It has been made such that it can remove up to 99% of contaminants and toxins from water. It can remove up to 1000 different contaminants such as chlorine, lead, fluoride, and heavy metals. It also removes toxins and bacteria to make sure that you have clean water.
The filter has a capacity of 50 gallons per day at a rate of 60 psi and 30 gallons per day at a rate of 50 psi. It has a full tank capacity of 4 gallons with a water pressure of 40-85 psi.
The filters used are of premium quality to make sure that they are long lasting. The faucet has been made with a good material that is 100% lead free as it has been made out of food-grade material.
Unlike other filters, the fittings have been made well so that they are leak free. You do not need more clips to prevent leakage. It also does not need a leak detector too protect your home from leaks.
The water filter system comes with a 2-year manufacturer warranty in addition to all necessary instructions.
- Weight: 25 pounds
- Product dimensions: 16 x 5.2 x 17.5 inches
- It can remove up to 1000 different contaminants
- Seal leaks makes sure that there are no leaks
- Premium quality filters that are long lasting
- It has a big capacity of up to 50 gallons
- 2-year extended warranty
- Some users complained of the filter only lasting a few months
- It is not the easiest to install
- Some users complained of too much water flushing
All the above are great picks of house water filters for fluoride and chlorine. It is however important to know what to look for when you are searching for a house water filter to make the right choice. Some of the factors to consider when looking for a house water filter includes:
The kind of water you have will determine the kind of filter that will be right for you. This is because different sources of water have different types of contaminants. Most municipal water for example has high levels of fluoride. Well water has a high volume of heavy metals. You can test your water to know the contaminants in it so that you know what system can work out for you.
Water flow rate
It is important to know the water flow rate of your faucets before going to buy a water filter system so that there is no pressure variation. The flow rate of the water filter system should not be higher than that of the house or there is going to be burst or increased leakage. If the flow rate is not balanced, the filter cartridges will be affected making them have a short life span.
Your household needs
Different filters have different capacities. That, therefore, means that the size of your household will affect the kind of filter that will be right for you.
Water filters differ in costs depending on the kind of features that they have. At the end of the day, it all depends on what you are looking for. It is important to research and compare to get a filter that will give you more value for money.
There are some sellers that give warranties and others that have extended warranties. The latter is better as you are sure that if anything happens to your filter within that period you can be compensated. It also shows that the seller is credible.
Through reviews, you can get to know about the experiences of other customers with the filter which can help you make an informed choice.
From the considerations above, at least you have an idea of what to consider when looking for a water filter. From our reviews of the 4 best house water filters, it may be confusing on which exact one to choose. We will, however, make it easier for you by going to the specifics so that you can make an easier choice.
Best in water pressure: When it comes to the water filter with the best water pressure, the iSpring RCB3P 300 GPD Light Commercial Reverse Osmosis RO Water Filter System takes the lead. It has an in-built booster pump that helps in boosting the pressure.
Biggest capacity: Even though most of the filters that we reviewed have decent water filtration capacities, the Woder WD-FRM-8K-DC water filtration system has the biggest capacity. Unlike others that can do 300 gallons per day, the Woder WD-FRM-8K-DC has the capacity to do up to 8000 gallons.
Easiest to install: When it comes to the ease of installation, the Woder WD-FRM-8K-DC water filter system takes the lead. It is the easiest to install comparatively and comes with a clear set of instructions.
Least leaks: When it comes to leaks which is a major issue with water filter system, the APEC Top Tier 5-Stage Ultra Safe Reverse Osmosis Drinking Water Filter System has been made such that there are seal leaks to make sure that you don’t get any leaks.
Most budget-friendly: when it comes to the cost, the ispring system is the most expensive and goes for $546. The rest are cheaper with Fluoride Lead Chlorine Removal Undercounter Water Filter System and APEC Top Tier 5-Stage water filter both having the same price of $189. In this case you will have to do a comparison to determine which one will best suit your need.
Our overall recommendation
When it comes to our overall recommendation, it depends on what you are looking for. If you have a big household and big filtration needs, then the Woder WD-FRM-8K-DC water filtration system will be best suitable as it has a big capacity. If you are an average household, then we recommend the APEC Top Tier 5-Stage Ultra Safe Reverse Osmosis Drinking Water Filter System. It is price friendly, will make sure that you don’t get any leaks, and comes with an extended manufacturer warranty.
We believe that it is much easier for you to choose the right system for your home. It is, however, important to note that most reverse osmosis systems will remove everything from your water even trace elements such as calcium and magnesium. If you are looking for a balanced mineralized water, then you should re-consider that. It is also important to note that you will have to replace the water filter cartridge every few months to make sure that it works efficiently. How long it will last will depend on your maintenance and your water pressure.